Freeze Your Nuts Off Penetrating Lubricant
The latest breakthrough in penetrating lubricant technology.
By combining rapid freezing action with an advanced, rust eating formula, seized or rusted parts are easily released. Shrinkage of sprayed parts quickly breaks open micro fine fissures allowing the lubricant to easily penetrate even the toughest rust. The innovative XA-17™ Rust Eating Technology then dissolves rust making the job a snap and future maintenance easier as well.
Ideal for use in the most demanding penetrating lubricant applications including rusted manifold bolts, exhaust flanges, industrial, marine, farm, or other outdoor exposed equipment. Freeze Your Nuts Off Penetrating Lubricant contains NO chlorinated solvents or ozone depleters and is non-conductive to 33,000 volts for use around live equipment.
The 360° spray valve allows for use in any position and for access to hard-to-reach areas while the large pad actuator prevents freezing of fingertips. This is an ultra-low VOC content product.
When you can’t get that rusted part off, this is your go to product. Freeze Your Nuts Off Penetrating Lubricant works quickly to release that rusted part and gets you back to doing what you need to. Keep a can on hand for those tough rusted parts.
How to Use Freeze Your Nuts Off Penetrating Lubricant:
- NOTE: Sudden temperature drop can result in “thermal shock” which may cause crazing of some plastics and paint. While appropriate for use on many plastics and painted surfaces, always test in an inconspicuous area before general use. Accumulated vapors from this product may reach ignition conditions in confined spaces. Always use with adequate ventilation.
- Shake well before using.
- Insert extension tube provided.
- Spray liberally for 5-10 seconds on surface to be lubricated. Target the bolt, nut or part and limit the amount of contact to the surrounding area.
- Wait 30 seconds to allow temperature reduction and to facilitate penetration.
- Loosen or remove part.
- Repeat if necessary.
- Instantly freezes seized and rusted bolts, nuts and parts down to 45 degrees below zero in less than five seconds
- Rapid freezing causes microscopic cracks in the layer of rust allowing the penetrating oil to wick directly into the rust by capillary action
- Combines rapid freezing action with an advanced, rust eating formula – seized or rusted parts are released easily
- 360° Spray Valve for those hard-to-reach areas
- Non-Conductive to 33,000 volts for use around live equipment
- Innovative XA-17™ Rust Eating Technology dissolves rust
- Ultra low VOC content and NO chlorinated solvents or ozone depleters
- Prevents removal by cutting or drilling
- Penetrates the toughest rust
- Saves time and avoids costly re-work
Ideal For Use On:
- Rusted manifold bolts
- Exhaust flanges
- Outdoor exposed equipment